Five33 TinyTrainer 3″ Frame Kit V2 with Canopy
All items shipped next day
Description
Five33 TinyTrainer 3″ Frame Kit V2 with Canopy
The TinyTrainer 3“ Carbon Frame was originally developed for Evan “Headsup” Turner to practice flying big drones in his little backyard but became so much more. The flight characteristics of this drone, with the recommended build, result in a racing experience only found in the PRO FPV racing leagues.
Everything about the V1, just better.
The biggest complaints over the 2 years Tiny Trainers have been flying around the world are;
- “I hate when I break the base plate in a hard crash. I have to swap over my entire build to a new plate, ending my day of flying.”
- ” I can’t stand that I have to unscrew 4 screws AND cut 4 Zip ties just to open up the body of the drone”
- “I’m tired of messing with TPU camera mounts, my printer never works, and I hate buying prints”
- “I prefer mounting batteries with a battery strap, my other micros even let me use rubber bands!”
Removable Arms
Tiny Trainer V2 comes standard with 3mm thick, ONE screw arm removal. Not only that, it uses steel M3 screws, so you never have to worry about stripping a screw when tightening your arms. Break an arm in the field? Take off your motor, pull the arm screw and bolt your new one on. You’re back in the air within 5 minutes.
Quick Fix Canopy Design
Taking the canopy off the Tiny Trainer V1 got old fast, now it’s as simple as loosening 2 screws. Once the back 2 screws are loosened (not removed) the entire body of the Tiny Trainer V2 unfolds, giving you access to 100 percent of the internals of the drone. You’re ready to go fly, pull the hood back down, tighten up your screws, and rip! This drone is easier to work on than ever.
Integrated Injection Molded Camera Mount
No more dealing with 3D printed camera mounts, The Tiny Trainer V2 integrates a beautiful nano cam mount into the front of the Canopy. 2 mounting points available allowing a 30-60 degree mount and 5-25 degree mount! All while being fully integrated in the injection Molded Canopy.
Customizable Battery Solution
Armando’s design allows for the use of the battery tray V2 (recommended for 550 mah 3s), Micro battery strap, and even rubber bands. You can use nearly ANY battery on a Tiny Trainer V2.
Does not include a TPU battery cage, this can be purchased separately OR 3D printed. The link can be found below.
Specifications
- The frame supports 16 x 16 stacks and 25 mm toothpick AIO boards
- Supports both 9mm and 12mm mounting pattern motors.
- Developed for Evan “HeadsUp” Turner
- 2mm Carbon Frame
- Full frame kit including hardware
Includes
- 1x Five33 TinyTrainer 3″ V2 carbon components
- 1x Hardware
- 1x Canopy
- Frame kit only, this does not include motors and other electrical components.
- Does not include TPU battery cage
STL Files
How to build?
-
Free Shipping
Spend $200 or more to receive free shipping within Australia*
-
Returns and Exchanges
Purchased an item by mistake? We're happy to exchange it within 7 days. See T&Cs.